[postlink]https://expansionvideos.blogspot.com/2015/05/eb3t-sas-sata-raid-set-up.html[/postlink]http://www.youtube.com/watch?v=hohEttx95XQendofvid
[starttext]
How to set-up and configure EB3T with SAS / SATA RAID on a Mac OS (10.8.x) MacBook Pro ( MacMini / MacBook Air).This is also applicable to 10.9 and 10.10 Mac Operating Systems.
[endtext]
Showing posts with label EB3T. Show all posts
Showing posts with label EB3T. Show all posts
[postlink]https://expansionvideos.blogspot.com/2015/05/how-to-turn-on-off-eb1t.html[/postlink]http://www.youtube.com/watch?v=7h9PiKZ0Usgendofvid
[starttext]
How to turn on & off the Magma EB1T unit.
When power cord is connected to EB1T it immediately goes to standby mode.
-2 Green LEDs on Interface Card + 2 Green LEDs on Backplane are illuminated..
[endtext]
How To Turn On & Off EB1T
[postlink]https://expansionvideos.blogspot.com/2015/05/how-to-turn-on-expressbox-3t.html[/postlink]http://www.youtube.com/watch?v=Okl0djydUdAendofvid
[starttext]
Demonstration on how to power UP and power down the EB3T expansion unit.
[endtext]
How to turn ON the ExpressBox 3T
[postlink]https://expansionvideos.blogspot.com/2015/05/replacing-thunderbolt-interface-card.html[/postlink]http://www.youtube.com/watch?v=hDQABEhagycendofvid
[starttext]
How to remove and install Thunderbolt Interface card. This method is applicable to EB3T and EB1T expansion units.
[endtext]
Replacing Thunderbolt Interface Card
[postlink]https://expansionvideos.blogspot.com/2015/05/eb3t-storage-drive-kit-installation.html[/postlink]http://www.youtube.com/watch?v=Y62qgCHiZEMendofvid
[starttext]
Installation of Storage Drive Kit for 3slot Thunderbolt Expansion and installation of 4 Drives.
The kit is composed of 6 items
1. Drive Cage with 4 drive trays
2. Interface Board
3. Power Cable
4. SAS / SATA Cable
5. Screws for Interface Board
6. Screws for Drive, Drive Cage and Trays
Drives and Controller Card don't come with the Kit.
You can use either SATA / IDE Drives or SSD Drives
Controller PCIe card: Areca X4 or X8 controller card
[endtext]
EB3T Storage Drive Kit Installation
[postlink]https://expansionvideos.blogspot.com/2015/05/replace-eb3t-fan-with-avid-approved-fan.html[/postlink]http://www.youtube.com/watch?v=Ps-tWXL70T8endofvid
[starttext]
How to Replace Existing EB3T Fan with New Avid-Approved Fan & How to Set the Fan to Speed
[endtext]
Replace EB3T Fan with Avid-Approved Fan
[postlink]https://expansionvideos.blogspot.com/2012/11/verify-eb3t-pcie-hw-in-windows-7.html[/postlink]http://www.youtube.com/watch?v=X3jh62V_z5kendofvid
[starttext]
How to check if your Magma ExpressBox 3T HW and PCIe cards devices are being recognized in Windows7 Device Manager. In this demo, the three PCIe card devices have no drivers, so they are all coming up with Yellow Flag
The Magma ExpressBox 3T is connected to MacMini computer running on Windows7 boot camp.
[endtext]
Verify EB3T & PCIe HW in Windows 7
[postlink]https://expansionvideos.blogspot.com/2012/11/pro-tools-hdx-installation-in-eb3t.html[/postlink]http://www.youtube.com/watch?v=QHhhpYgAmdoendofvid
[starttext]
This is for Demonstration use only. Using "Prototype" HDX cards.
How to install Pro Tools HDX cards and how to plug-in Aux power cables.
For further technical assistance on how to set-up your Pro Tools Hardware & Software please contact the Manufacturer of the card.
[endtext]
Pro Tools HDx Installation in EB3T
[postlink]https://expansionvideos.blogspot.com/2012/11/eb3t-auxiliary-power-cable.html[/postlink]http://www.youtube.com/watch?v=4HWsPmhWFUkendofvid
[starttext]
First generation (pre production ) of EB3T expansion units have one Auxiliary Power cable. This is applicable to EB3T Units with date Code MG211A111XXXX. It includes a single Y splitter Power Cable.
Second batch of EB3T expansion units with Date Code MG211A1202 (and above) have 2 Auxiliary power cables. The Y Splittery is no longer included with these units.
[endtext]
EB3T Auxiliary Power Cable
[postlink]https://expansionvideos.blogspot.com/2012/07/how-to-check-eb3t-device-in-apple.html[/postlink]http://www.youtube.com/watch?v=hspfBbSyrAAendofvid
[starttext]
Steps on how to check and verify ExpressBox 3T and PCIe card in Apple System profiler. Magma ExpressBox 3T requires no software or driver.
PCIe cards must have a compatible Thunderbolt driver.
[endtext]
How to check EB3T Device in Apple System Profiler
[postlink]https://expansionvideos.blogspot.com/2012/07/how-to-adjust-fan-speed-of-eb3t.html[/postlink]http://www.youtube.com/watch?v=My3CnBG48QQendofvid
[starttext]
Steps or procedures on how to reduce or increase the fan speed in ExpressBox 3T. For low power or self-cooled cards you can adjust the fan speed/noise by moving the jumper found under the removable cooling fan at the front of the unit. If your cards tend to get hot, you can increase the fan speed for improved cooling. The Factory Default is setting 2 (medium). The slowest speed is setting 4 and the fastest speed is setting F
[endtext]
How to Adjust Fan Speed of EB3T
[postlink]https://expansionvideos.blogspot.com/2012/07/expressbox-3t-three-slot-thunderbolt.html[/postlink]http://www.youtube.com/watch?v=ENfVxPtERWAendofvid
[starttext]
PCI Express, meet Thunderbolt
The Magma ExpressBox 3T is designed to match the throughput established by Intel's Thunderbolt technology and the majority of PCIe cards on
themarket today. The expansion chassis contains three PCI Express slots connected to the computer through a Thunderbolt cable. Add one or more
PCIe cards to Magma ExpressBox 3T and your Thunderbolt equipped computer turns into a powerful audio/video editing or scientific workstation
[endtext]
ExpressBox 3T - Three-Slot Thunderbolt™
[postlink]https://expansionvideos.blogspot.com/2012/07/quick-set-up-expressbox-3t.html[/postlink]http://www.youtube.com/watch?v=ZD2JnDk8M30endofvid
[starttext]
Basic and quick steps for setting up the ExpressBox 3T.
Attach the power cord to the back of the Magma product and plug into a power source. Connect a Thunderbolt cable to one of the ports on the back of Magma product to the Thunderbolt port on your omputer. You can use the second Thunderbolt port to connect to another Thunderbolt device or a mini DisplayPort device.
ExpressBox 3T will automatically turn ON and OFF when the computer is turned ON and OFF. A BLUE light will shine when the expansion chassis is ON. If either end of the Thunderbolt cable is removed while the system is ON, the expansion chassis will automatically power down.
ExpressBox 3T does not have ON/OFF switch. The BLUE LED on the front is an INDICATOR, not a power SWITCH. To turn ON the expansion chassis, connect to a Thunderbolt equipped computer
[endtext]
Quick Set-Up - ExpressBox 3T
[postlink]https://expansionvideos.blogspot.com/2012/07/how-to-install-pcie-cards-in-expressbox.html[/postlink]http://www.youtube.com/watch?v=QpvLYcKr1Qwendofvid
[starttext]
•Three PCIe 2.0 expansion slots (Two x8 and One x4)
•220-250W power supply with auxiliary power connectors
•10Gbps Thunderbolt connection
PCI Express, meet Thunderbolt
The Magma ExpressBox 3T is designed to match the throughput established by Intel's Thunderbolt technology and themajority of PCIe cards on themarket today. The expansion chassis contains three PCI Express slots connected to the computer through a Thunderbolt cable. Add one or more PCIe cards to Magma ExpressBox 3T and your Thunderbolt equipped computer turns into a owerful audio/video editing or scientific workstation.
High-Speed I/O Technology
Developed by Intel® and brought to market with collaboration from Apple, Thunderbolt technology is a high-speed I/O technology running at 10Gbps per second that brings together high-speed data transfer and high-definition (HD) display on to a single able.
[endtext]
How to Install PCIe cards in ExpressBox 3T
Subscribe to:
Posts (Atom)