Showing posts with label EB3T. Show all posts
Showing posts with label EB3T. Show all posts
0
[postlink]https://expansionvideos.blogspot.com/2015/05/eb3t-sas-sata-raid-set-up.html[/postlink]http://www.youtube.com/watch?v=hohEttx95XQendofvid [starttext] How to set-up and configure EB3T with SAS / SATA RAID on a Mac OS (10.8.x) MacBook Pro ( MacMini / MacBook Air).This is also applicable to 10.9 and 10.10 Mac Operating Systems. [endtext]

EB3T: SAS / SATA RAID Set-Up

0
[postlink]https://expansionvideos.blogspot.com/2015/05/how-to-turn-on-off-eb1t.html[/postlink]http://www.youtube.com/watch?v=7h9PiKZ0Usgendofvid [starttext] How to turn on & off the Magma EB1T unit. When power cord is connected to EB1T it immediately goes to standby mode. -2 Green LEDs on Interface Card + 2 Green LEDs on Backplane are illuminated.. [endtext]

How To Turn On & Off EB1T

0
[postlink]https://expansionvideos.blogspot.com/2015/05/how-to-turn-on-expressbox-3t.html[/postlink]http://www.youtube.com/watch?v=Okl0djydUdAendofvid [starttext] Demonstration on how to power UP and power down the EB3T expansion unit. [endtext]

How to turn ON the ExpressBox 3T

0
[postlink]https://expansionvideos.blogspot.com/2015/05/replacing-thunderbolt-interface-card.html[/postlink]http://www.youtube.com/watch?v=hDQABEhagycendofvid [starttext] How to remove and install Thunderbolt Interface card. This method is applicable to EB3T and EB1T expansion units. [endtext]

Replacing Thunderbolt Interface Card

0
[postlink]https://expansionvideos.blogspot.com/2015/05/eb3t-storage-drive-kit-installation.html[/postlink]http://www.youtube.com/watch?v=Y62qgCHiZEMendofvid [starttext] Installation of Storage Drive Kit for 3slot Thunderbolt Expansion and installation of 4 Drives. The kit is composed of 6 items 1. Drive Cage with 4 drive trays 2. Interface Board 3. Power Cable 4. SAS / SATA Cable 5. Screws for Interface Board 6. Screws for Drive, Drive Cage and Trays Drives and Controller Card don't come with the Kit. You can use either SATA / IDE Drives or SSD Drives Controller PCIe card: Areca X4 or X8 controller card [endtext]

EB3T Storage Drive Kit Installation

0
[postlink]https://expansionvideos.blogspot.com/2015/05/replace-eb3t-fan-with-avid-approved-fan.html[/postlink]http://www.youtube.com/watch?v=Ps-tWXL70T8endofvid [starttext] How to Replace Existing EB3T Fan with New Avid-Approved Fan & How to Set the Fan to Speed [endtext]

Replace EB3T Fan with Avid-Approved Fan

0
[postlink]https://expansionvideos.blogspot.com/2012/11/verify-eb3t-pcie-hw-in-windows-7.html[/postlink]http://www.youtube.com/watch?v=X3jh62V_z5kendofvid [starttext] How to check if your Magma ExpressBox 3T HW and PCIe cards devices are being recognized in Windows7 Device Manager. In this demo, the three PCIe card devices have no drivers, so they are all coming up with Yellow Flag The Magma ExpressBox 3T is connected to MacMini computer running on Windows7 boot camp. [endtext]

Verify EB3T & PCIe HW in Windows 7

0
[postlink]https://expansionvideos.blogspot.com/2012/11/pro-tools-hdx-installation-in-eb3t.html[/postlink]http://www.youtube.com/watch?v=QHhhpYgAmdoendofvid [starttext] This is for Demonstration use only. Using "Prototype" HDX cards. How to install Pro Tools HDX cards and how to plug-in Aux power cables. For further technical assistance on how to set-up your Pro Tools Hardware & Software please contact the Manufacturer of the card. [endtext]

Pro Tools HDx Installation in EB3T

1
[postlink]https://expansionvideos.blogspot.com/2012/11/eb3t-auxiliary-power-cable.html[/postlink]http://www.youtube.com/watch?v=4HWsPmhWFUkendofvid [starttext] First generation (pre production ) of EB3T expansion units have one Auxiliary Power cable. This is applicable to EB3T Units with date Code MG211A111XXXX. It includes a single Y splitter Power Cable. Second batch of EB3T expansion units with Date Code MG211A1202 (and above) have 2 Auxiliary power cables. The Y Splittery is no longer included with these units. [endtext]

EB3T Auxiliary Power Cable