0
[postlink]http://expansionvideos.blogspot.com/2011/10/how-to-hot-plug-pcie-card-in-eb7x8.html[/postlink]http://www.youtube.com/watch?v=j2qsN1Sb9CIendofvid






[starttext]

How to hot-plug a pcie card that is installed in the Magma EB7x8 Gen2 expansion chassis. In order to perform the hot-plug, the Magma EB7X8 Gen2 chassis should have the Hot-Plug feature enabled first. And the chassis should and always be connected to a computer. You can't hot-plug a PCIE card when the host computer is not attached (and turned on). Also, the PCIE card must support hot-plug, meaning the PCIE card is hot-pluggable.

[endtext]

How to hot-plug PCIE card in EB7X8

Labels:
1
[postlink]http://expansionvideos.blogspot.com/2011/10/how-to-connect-4slotne.html[/postlink]http://www.youtube.com/watch?v=sURHbaQ3VC0endofvid




4slot PCI non-enclosed expansion board. How to properly connect the backplane and expansion board together. And how to and where to connect the power On/Off switch cable, LED cable and Power Supply cable.



[starttext]

How to connect or assemble a 4slot expansion board and backplane together. And how to and where to connect the on/off switch wire assembly and power supply.
[endtext]

How to connect 4slotNE

Labels:
0
[postlink]http://expansionvideos.blogspot.com/2011/09/host-interface-cards-for-desktop.html[/postlink]http://www.youtube.com/watch?v=G6wLGfVRR_Qendofvid

[starttext]

Different Types of Host Interface cards from PCI to PCIexpress based cards for Desktop/ Workstation/Server/Rackmount computer platforms.
[endtext]

Host Interface cards for Desktop

Labels:
0
[postlink]http://expansionvideos.blogspot.com/2011/09/installation-of-pe6ne-i-expansion-card.html[/postlink]http://www.youtube.com/watch?v=0es81KPyPRcendofvid

[starttext]

The video shows how to remove the expansion card from the 6SLOT backplane and the next one is how to install it. The expansion card is also known as mezzanine / daughter card. Mezzanine cards are daughter cards which feature electrical components and interfaces or both.


[endtext]

Installation of PE6NE-I Expansion card

Labels:
0
[postlink]http://expansionvideos.blogspot.com/2011/09/host-interface-cards-for-laptop.html[/postlink]http://www.youtube.com/watch?v=gWVhpK-DXl0endofvid

[starttext]
Host Interface cards for Laptop

Using four different types of host insterface cards with Laptop-pc and Apple MacBook Computers.

1. CBHIF: cardbus host interface. Mainly use for Laptop-pc that thas a TYPEII cardbus slot

2. ExpressCard54(aka EC54): use for Laptop-pc that has an a 54mm wide expresscardslot

3. ExpressCard34, Ec34 and Ex34: Both Expresscards can be used with MacBook Pro and Laptop PC computers with Slot that is 34mm wide



[endtext]

Host Interface cards for Laptop

Labels: , ,
0
[postlink]http://expansionvideos.blogspot.com/2011/09/1slot-expansion-product-info.html[/postlink]http://www.youtube.com/watch?v=JRbFnWvIOQYendofvid

[starttext]
1slot Expansion Product Info
Magma 1slot PCI Expansion system. The video shows you the major components of the 1slot expansion system, internal parts of it and the different host interface cards you can use.

There are three types of laptop host cards available for 1slot expansion system and they are as follows:

1. Ec54
2. Ec34
3. CardBus


There are also several types of Host Interface card for Desktop computer platforms

1. PCHIF68, this is a 32bit PCI
2. PEHIFX1, this is a X1 PCIe
3. PCHIFlP64, this is a 64bit PCI




[endtext]

1slot Expansion Product Info

Labels:
0
[postlink]http://expansionvideos.blogspot.com/2011/09/1slot-cardbus-pci-chassis-set-up.html[/postlink]http://www.youtube.com/watch?v=6I_mSw6vyvEendofvid

[starttext]

How to set-up a 1slot unit and how to plug-in a simple PCI card.
In this video, we are using a 5v PCI Ethernet card and a Magma cardbus card.



[endtext]

1slot Cardbus-PCI chassis set-up

Labels:
0
[postlink]http://expansionvideos.blogspot.com/2011/06/fan-control-switch.html[/postlink]http://www.youtube.com/watch?v=10_u_pjwTT8endofvid

[starttext]

How to minimize the fan noise in the expansion chassis

Using the fan control switch to minimize the fan noise or to control the speed of the fan in the expansion chassis. Locate the dip switch on the expansion board and set it to ON position.

Slow down the fan speed, toggle the switch to On position
High speed, toggle the switch to Off Position
Off means the Fan is running continiously on high speed
On means the fan is being controlled by the thersmistor, so that it runs at low speed unless the thermistor detects elevated temperatures and increases the fan speed.




[endtext]

Fan Control Switch

Labels:
2
[postlink]http://expansionvideos.blogspot.com/2011/05/pci-boards-and-backplane.html[/postlink]http://www.youtube.com/watch?v=5iqI4SWb380endofvid

[starttext]

Magma PCi Expansion boards and backplane. These are PCI based, most of these expansion boards are use for PCI cards.


[endtext]

PCI Boards and Backplane

Labels:
Subscribe to: Posts (Atom)